Ornament Instructions

⭐ How to Make Your Light-Up Christmas Ornament

Prepare Your Materials

Take your ornament, light string, pompoms, sticker design, and hanger.
Make sure the ornament is dry and clean.

Extend the Lights

Gently extend the mini LED light string so it’s not tangled.
Keep the switch box close — you’ll need it later.

Open the Ornament

Carefully open your clear ornament.
Remove the pompoms from the packet and keep them close.

Fill the Ornament

Swirl the light string inside the ornament.
Add the pompoms, mixing them with the lights for a bright, colorful effect.
Adjust the placement so the lights are visible.

Close the Ornament

Close the ornament while leaving the switch box outside.
Make sure the wire sits comfortably so the ornament shuts fully.

Secure the Switch Box

Take one adhesive stick-dot.
Press it onto the back of the switch box.
Stick the switch box to the outside of the ornament, near the hanging area.

Add the Hanger

Insert the wire hanger into the small top hole.
Twist and pull gently until the hanger locks in place.

Apply Your Sticker Design

Press the sticker on its backing paper firmly so the pieces stay attached.
Carefully peel off the film with the design.
Place the sticker film onto your ornament where you want the design.
Gently press only the shapes/elements — not the clear film.
Slowly remove the film, leaving the design on the ornament.

Turn On The Magic

Flip the switch and watch your ornament glow!